Jio Mesh Extender Not Working! Easy Fixes To Try Now!

If your Jio Mesh Extender isn’t working, here’s a step-by-step guide to troubleshoot and potentially fix the issue:

Check the Basics:

• Make sure the extender is plugged into a power source.
• Verify that your main router is online and functioning.

Restart Your Devices:

• Turn off your Jio Mesh Extender and your main router.
• Wait for about a minute before turning them back on. This can clear any temporary glitches.

Check the Connections:

• Ensure that the extender is within the range of your main router.
• If you have an Ethernet cable connected, ensure it’s not damaged and is securely plugged in.

Examine the Indicators:

Look at the LED lights on the extender. A stable light usually indicates good connection, while a blinking or red light may signal an issue.

Access the Extender’s Web Interface:

• Try to connect to the extender’s settings page using its IP address.
• Check for any incorrect settings that might need adjustment.

Update Firmware:

Check if there’s a firmware update available for your extender. Manufacturers often release updates to fix known issue.

Factory Reset:

• If nothing else works, consider resetting the extender to its factory settings.
• There should be a reset button on the device. Press and hold it for about 10 seconds.

Read Also : Jio Mesh Extender Not Working! Easy Fixes To Try Now!

Consult Support:

If you’ve gone through these steps and the extender still isn’t working, reach out to Jio customer support for assistance.

Remember to keep your extender’s firmware updated and periodically check for any new updates or patches that may improve its performance and fix known issues.